Check At Ecu Terminals
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
ECU TERMINALS VOLTAGE SPECIFICATION
| Terminal No. | Check item | Check condition | Normal condition |
|---|---|---|---|
| 1 | reciever antenna assembly CLOCK output | Ignition key lock button, unlock button, and trunk lid button: ON | 0 to 5 V (pulse signal) |
| 2 | - | - | - |
| 3 | reciever antenna assembly DATA output | Ignition key lock button, unlock button, and trunk lid button: ON | 0 to 5 V (pulse signal) |
| 4 | - | - | - |
| 5 | reciever antenna assembly power control | Ignition switch: OFF | 0 to 5 V (pulse signal) |
| 6 | Power supply (Battery) | Always | Battery voltage |
| 7 | Ground | Always | 0 V |
| 8 | reciever antenna assembly ground | Always | 0 V |
| 9 | Power supply (Ignition switch: IG1) | Ignition switch: ON | Battery voltage |
| 10 | CAN L | - | - |
| 11 | CAN H | - | - |
| 12 | reciever antenna assembly power supply | Always | 5 V |