Section 38 (Keyless Entry System - Vehicles Without Keyless Operation System - With Diagnostics)
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Special Tool
- Keyless Entry System Diagnosis
- Diagnostic Trouble Code Procedures
- DTC B1A08: Keyless/F.A.S.T. key 1 fail; DTC B1A09: Keyless/F.A.S.T. key 2 fail; DTC B1A0A: Keyless/F.A.S.T. key 3 fail; DTC B1A0B: Keyless/F.A.S.T. key 4 fail; DTC B1A0C: Keyless key 5 fail; DTC B1A0D: Keyless key 6 fail; DTC B1A0E: Keyless key 7 fail; DTC B1A0F: Keyless key 8 fail
- DTC B1A10: Keyless/F.A.S.T. key 1 low BATT.; DTC B1A11: Keyless/F.A.S.T. key 2 low BATT.; DTC B1A12: Keyless/F.A.S.T. key 3 low BATT.; DTC B1A13: Keyless/F.A.S.T. key 4 low BATT.; DTC B1A14: Keyless key 5 low battery; DTC B1A15: Keyless key 6 low battery; DTC B1A16: Keyless key 7 low battery; DTC B1A17: Keyless key 8 low battery
- Trouble Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: Keyless Entry System Does Not Work
- Inspection Procedure 2: Keyless Entry Hazard Light Answerback Function Or The Dome Light Answerback Function Does Not Work Normally
- Inspection Procedure 3: The Timer Lock Function Does Not Work After The Doors Have Been Unlocked By The Keyless Entry System
- Inspection Procedure 4: Power Door Locks With Selective Unlocking Does Not Work
- On-Vehicle Service
- Transmitter