Check Of Freeze Frame Data
WARNING: This page is about a different variant/trim than selected.
The freeze frame data can be checked by using the scan tool ( HOW TO COPE WITH INTERMITTENT MALFUNCTION ).
When detecting fault and storing the DTC, the ECU connected to CAN bus line obtains the data before the determination of the DTC and the data when the DTC is determined, and then stores the ECU status of that time. By analyzing each data from scan tool, the troubleshooting can be performed more efficiently. The displayed items are as the table below.
DISPLAY ITEM LIST
| Item No. | Item name | Data item | Unit | ||
|---|---|---|---|---|---|
| 01 | Odometer | Total driving distance after the diagnostic trouble code is generated | mile(1) | ||
| 02 | Ignition cycle | Number of times the ignition switch is turned "ON" or "LOCK (OFF)" after the past failure transition | Number of counts is displayed. | ||
| 04 | Current trouble accumulative time | Cumulative time for current malfunction of diagnostic trouble code | min | ||
|
|||||