INSPECTION - 2.4L Engine: Stator

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Check the electrical continuity between the stator coil terminals.

Check the electrical continuity of the points shown in the chart below. Confirm that there is electrical continuity.

If there is not, replace the stator.

Terminal connector of tester	Electrical continuity
1 - 2	Presence of electrical continuity
1 - 3
2 - 3
4 - 5
4 - 6
5 - 6

Fig 1: Identifying Stator Coil Terminals

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Check the insulation between the stator coil terminal and the coil.

Check the electrical continuity of the points shown in the chart below. Confirm that there is not electrical continuity.

If there is, replace the stator.

Terminal connector of tester	Electrical continuity
1 - Core	Absence of electrical continuity
2 - Core
3 - Core
4 - Core
5 - Core
6 - Core

Fig 2: Checking Stator Electrical Continuity (1 Of 2)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Check the insulation between coil terminals of each group.
Check the electrical continuity of the points shown in the chart below. Confirm that there is not electrical continuity.
If there is, replace the stator.

Fig 3: Checking Stator Electrical Continuity (2 Of 2)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Terminal connector of tester	Electrical continuity
1 - 4	Absence of electrical continuity
1 - 5
1 - 6
2 - 4
2 - 5
2 - 6
3 - 4
3 - 5
3 - 6