Inspection Procedure 1: Steering Wheel Remote Control Switch (Audio Remote Control Switch) Does Not Function. < Vehicles With Radio And CD player >: Diagnosis
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Required Special Tools:
- MB991223: Harness Set
- MB992006: Extra Fine Probe
- STEP 1. Check the steering wheel remote control switch.
Check the steering wheel remote control switch (Refer to STEERING WHEEL AUDIO REMOTE CONTROL SWITCH CHECK ).
Q: Is the check result normal?
- YES: Go to Step 2.
- NO: Replace the steering wheel remote control switch.
- STEP 2. Check the clock spring.
Check whether the clock spring is in good condition. Refer to DRIVER'S AIR BAG MODULE AND CLOCK SPRING .
Q: Is the check result normal?
- YES: Go to Step 3.
- NO: Replace the clock spring.
- STEP 3. Check of short to power supply, short to ground, and open circuit in REM+, REM-line between radio and CD player connector and steering wheel remote control switch connector
Q: Is the check result normal?
- YES: Go to Step 4.
- NO: Repair the connector(s) or wiring harness.
- STEP 4. Retest the system
Check whether you can operate the radio and CD player by using the steering wheel remote control switch.
Q: Is the check result normal?
- YES: The trouble can be an intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).
- NO: Replace the radio and CD player.