Freeze Frame Data Reference Table
Scan tool (M.U.T.-III) can be used to read the freeze frame data (the driving status when the failure occurs) at each diagnostic trouble code detection.
FREEZE FRAME DESCRIPTION
| Item No. | Item | Unit/display contents |
|---|---|---|
| 1 | Odometer | mile |
| 4 | Accumulated minute | min |
| 5 | AWC control mode (AWD control mode) | Mode 1 |
| Mode 2 | ||
| Mode 3 | ||
| Mode 4 | ||
| 6 | ABS status | OFF/ON |
| 7 | ABS/ASC actuation flag | OFF/ON |
| 8 | ASC torque reduction request | OFF/ON |
| 9 | Estimated vehicle speed | mph |
| 10 | Brake switch | OFF/ON |
| 11 | Parking brake switch | OFF/ON |
| 12 | ASC off switch | OFF/ON |
| 13 | Front coupling torque | Nm |
| 14 | Steering angle sensor | deg |
| 15 | Accelerator position | % |
| 16 | FL wheel speed sensor | mph |
| 17 | FR wheel speed sensor | mph |
| 18 | RL wheel speed sensor | mph |
| 19 | RR wheel speed sensor | mph |
| 20 | Center coupling torque | Nm |
| 21 | Yaw rate sensor | deg/s |
| 22 | Lateral G-sensor | m/s2 |
| 23 | Longitudinal G-sensor | m/s2 |
| 24 | Transfer temperature | °F |
| 25 | Front coupling temperature | °C |
| 26 | Center coupling temperature | °F |
| 27 | Front coupling clutch temperature | °F |
| 28 | Center coupling clutch temperature | °F |
| 29 | Master cylinder pressure | psi |
| 30 | Brake control torque difference | Nm |
| 31 | EPS torque sensor | Nm |
| 32 | EPS control torque | Nm |
| 33 | ASC equipment information | Not present/present |
| 34 | Handle side | Coding error/LH drive/RH drive |