>> B << Synchronizer Hub No.2 And Synchronizer Sleeve No.2 Installation

Before assembly, make sure that the hub and sleeve face the correct direction.
NOTE:
- Apply gear oil to the caulked area between the sleeve and the hub.
- After installation, confirm the sleeve and the hub slide smoothly.
Fig 1: Identifying Oil Groove
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Using special tools MD998812, MD998813, MD998820 and MD998917, install the synchronizer sleeve No.2 and synchronizer hub No.2.

Fig 2: Installing Synchronizer Sleeve 2 And Hub 2 Using Special Tools
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.