>> B << Synchronizer Ring Set No.1 (Synchronizer Outer Ring No.1, Synchronizer Middle Ring No.1, Synchronizer Inner Ring No.1) Installation

CAUTION: The rings of the synchronizer ring set No. 1 and No. 2 are dedicated to the 1st and 2nd gears. Be sure to install the right ring set to the right gear.

Make sure that the synchronizer outer ring of the synchronizer ring set No. 1 is as shown.

Fig 1: Identifying Outer Ring Of Synchronizer Ring Set No. 1
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Install the synchronizer ring set No. 1 aligning the claws of the synchronizer middle ring to the positioning holes in the 1st gear.
NOTE: Apply gear oil to the sufficiently on the sliding surface

Fig 2: Aligning Synchronizer Middle Ring Claws With 1st Gear Holes
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.