Actuator Test Reference Table: Notes
Using scan tool, the following actuators can be forcibly operated:
NOTE:
- ABS is operated by ABS-ECU.
- When ABS-ECU is disabled due to the fail-safe function, the actuator test cannot be performed.
- The actuator test can be performed only when the vehicle is stationary.
- While the actuator test is performed, the ABS warning light flashes at a rate of 2 Hz.
- After the actuator test has been performed, the brake warning light and ABS warning light illuminate until the ignition switch is turned to ON again or the communication between scan tool and ABS-ECU is terminated.
ACTUATOR TEST SPECIFICATIONS
| Item No. | Scan tool display | Driven component |
|---|---|---|
| 01 | FL wheel ABS drive | Solenoid valve for the corresponding wheel of the hydraulic unit and pump motor (simplified inspection mode) |
| 02 | FR wheel ABS drive | |
| 03 | RL wheel ABS drive | |
| 04 | RR wheel ABS drive |