Brake Disc Thickness Check
WARNING: This page is about a different variant/trim than selected.
- Remove contaminants or corrosion from the brake disc surface.
- Use a micrometer to measure the brake disc thickness at minimum eight points which are 10 mm (0.39 inch) inward from its circumference.
Standard value:
32.0 mm (1.26 inch) < Front >
22.0 mm (0.87 inch) < Rear >
Limit:
30.0 mm (1.18 inch) < Front >
20.0 mm (0.79 inch) < Rear >
- If the brake disc thickness is worn beyond the limit value at more than one point, replace the brake disc and check its run-out.