Service Specifications
WARNING: This page is about a different variant/trim than selected.
| Item | Standard value |
|---|---|
| Rotational starting torque of differential case N.m (in-lb) | 0.8 - 1.6 (7.08 - 14.16) |
| Output shaft bearing preload N.m (in-lb) | 0.8 - 1.6 (7.08 - 14.16) |
| Input shaft synchronizer hub No. 3 thrust crevice mm (in.) | 0 - 0.1 (0 - 0.0039) |
| Input shaft synchronizer hub No. 2 thrust crevice mm (in.) | 0 - 0.1 (0 - 0.0039) |
| Input shaft radial ball bearing thrust crevice mm (in.) | 0 - 0.1 (0 - 0.0039) |