<< B >> Piston Seal Removal

WARNING: This page is about a different variant/trim than selected.

CAUTION: Do not use a flat-tipped screwdriver or similar tool to remove the piston seal. These may damage the inner side of the cylinder.

Fig 1: Removing Piston Boot/Piston

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Remove the piston seal with your finger tip.
Clean the piston surface and cylinder inner face with alcohol or specified brake fluid.
Brake fluid: DOT3 or DOT4

Fig 2: Removing Piston Seal With Your Finger Tip
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.