LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2015 >> Lancer Evolution Final Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Intake & Exhaust System - Lancer Evolution) >> Exhaust Pipe And Main Muffler >> Removal And Installation >> Installation Service Points >> >> B << Heated Oxygen Sensor Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> B << Heated Oxygen Sensor Installation

WARNING: This page is about a different variant/trim than selected.

Tighten the heated oxygen sensor to the specified torque by using special tool MB991953.

Tightening torque: 44 ± 5 N.m (33 ± 3 ft-lb) 

Fig 1: Installing Heated Oxygen Sensor
G09640973Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals