HFM Self Check

WARNING: This page is about a different variant/trim than selected.

"OK": Normal (There is no abnormality in the hands free module.)
"NG": Abnormal (The hands free module may have a problem.)
NOTE: If "NG" is displayed, turn the ignition switch to the "OFF" position once. Then, turn the ignition switch to the "ON" position, and enter into the diagnosis mode. When the HFM Self Check display is NG again, the hands free module is determined to be defective.

Fig 1: Display - Hands Free Module Screen
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.