LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2015 >> Lancer Evolution Final Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Manual Transaxle On-Vehicle Service) >> Transaxle Assembly >> Removal And Installation >> Removal Service Points >> ><< B >> Cable Bracket And Transaxle Control Cable Assembly Removal < Transaxle Side >
April 5, 2026: LEMON Manuals is launched! Read the announcement.

><< B >> Cable Bracket And Transaxle Control Cable Assembly Removal < Transaxle Side >

WARNING: This page is about a different variant/trim than selected.
CAUTION: Be careful not to pull out the cable directly to disconnect the joint because the cable could be broken.

Use the clip remover (special tool: MB992277), and disconnect the joint.

Fig 1: Disconnecting Gearshift Joint Using Clip Special Tool MB992277
G05903869Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.