Customization Function
By operating the scan tool MB991958 ETACS system, the following functions can be customized. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool MB991958 display) | Adjustment item | Adjusting content (scan tool MB991958 display) | Adjusting content |
|---|---|---|---|
| Hazard answer-back | Hazard light blink time of keyless entry hazard light answerback function | Lock 0 Unlock 0 | No function |
| Lock 2 Unlock 0 | LOCK: Flash twice, UNLOCK: No flash | ||
| Lock 0 Unlock 1 | LOCK: No flash, UNLOCK: Flash once | ||
| Lock 2 Unlock 1 | LOCK: Flash twice, UNLOCK: Flash once | ||
| Lock 0 Unlock 2 | LOCK: No flash, UNLOCK: Flash twice | ||
| Lock 1 Unlock 0 | LOCK: Flashes once, UNLOCK: No flash | ||
| Lock 1 Unlock 2 | LOCK: Flashes once, UNLOCK: Flashes twice (Initial setting) | ||
| Auto fold mirror | Electric folding door mirror automatic unfolding function | Open Vehicle SPD | Vehicle speed-dependent operation (Initial setting) |
| OP/CL IG/PWR SW | Electric motor switch linked operation | ||
| OPN/CLS Keyless | Keyless entry linked operation | ||
| Not Auto | No synchronized operation | ||
| Auto-relock time | Timer lock period adjustment | 180 sec | 180 seconds |
| 120 sec | 120 seconds | ||
| 60 sec | 60 seconds | ||
| 30 sec | 30 seconds (Initial setting) | ||
| Multi mode RKE | Multi-mode keyless entry function customization | D-spec | Door mirror fold/unfold operation only (Initial setting) |
| not operate | No function |