Code No. C2206 Re-execution of variant coding: Notes
CAUTION:
- If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be stored. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
- Before replacing the ECU, ensure that the communication circuit is normal.
- When diagnostic trouble code No. C2206 is stored in ASC-ECU, the diagnostic trouble code may also be stored in ETACS-ECU. When the diagnostic trouble code is stored in ETACS-ECU, carry out the diagnosis of the diagnostic trouble code for ETACS-ECU first.
- When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the steering wheel sensor and the G and yaw rate sensor (Refer to G AND YAW RATE SENSOR CALIBRATION and STEERING WHEEL SENSOR CALIBRATION ).