LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2015 >> Mirage RF >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Active Stability Control System (ASC) - With Diagnostics >> Diagnosis >> Diagnostic Trouble Code Procedures >> Code No. U1195 Coding not completed >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code No. U1195 Coding not completed: Notes

CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be stored. Prior to this diagnosis, diagnose the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ).
  • Whenever ECU is replaced, ensure that the CAN bus lines are normal.
  • When the diagnostic trouble code U1195 is stored in ASC-ECU, the diagnostic trouble code may also be stored in ETACS-ECU. When the diagnostic trouble code is stored in ETACS-ECU, carry out the diagnosis of the diagnostic trouble code for ETACS-ECU first.
  • When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the steering wheel sensor and the G and yaw rate sensor (Refer to G AND YAW RATE SENSOR CALIBRATION  and STEERING WHEEL SENSOR CALIBRATION  ).
scientia non olet · About LEMON Manuals