Steering Lock/Steering Lock Bracket/Steering Lock Bolt Installation (Vehicles With Steering Lock)

1. Secure the steering lock bracket to the steering lock with steering lock bolt (upper). Tighten the steering lock bolt until its head is broken off.
   Fig 1: Mechanical Steering Lock

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. Insert the steering lock into the tip of the column shaft, fit the protrusion of the steering lock to the hole of the steering column shaft, install the steering lock and tighten the steering lock bolt (lower) until its head is broken off.
   Fig 2: Electric Steering Lock

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CAUTION: As for the mechanical steering lock for vehicles with CVT, connect the body side wiring harness connector to the key interlock solenoid connector. Do not connect the harness connector to the key interlock solenoid dummy connector. As for the mechanical steering lock for vehicles with M/T, connect the body side wiring harness connector to the key interlock solenoid dummy connector.

Fig 3: Key Interlock Solenoid Dummy Connector

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.