DIFFERNTIAL Case/Final Gear Installation

CAUTION: When attaching the final gear to the differential case, make sure the side with the bigger distance from the edge to the flange A face the differential case.

Distance from gear edge to flange A	Long
Distance from gear edge to flange B	Short

Fig 1: Checking Distance From Edge To Flange Face Differential Case

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Install the final gear on the differential case, and tighten the fastening bolts to the specified torque.

Tightening torque: 130 N.m (96 ft-lb)

Fig 2: Tightening Differential Case Final Gear Fastening Bolts

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.