Special Tools
SPECIAL TOOLS DESCRIPTION
| Tool | Tool number and name | Supersession | Application |
|---|---|---|---|
| MB992039 Slid hammer puller |
MB992039-01 | Remove of bearing outer race | |
| MB990590 Real axle shaft oil seal remover |
MB990211-01 | Use with slid hammer puller | |
| MB992195 Spring compressor |
- | Removal and installation of low and reverse brake snap ring | |
| MB991550 Bearing outer race installer |
- | Installation of differential taper roller bearing outer race | |
| MD998812 Installer cap |
MIT304180-A or General service tool | Use with installer and installer adapter | |
| MD998813 Installer-100 |
MIT304180-A or General service tool | Use with installer cap and installer adapter | |
| MD998830 Installer adapter |
MD998830-01 | Installation of bearing outer race | |
| MB991445 Bushing remover and installer base |
MB991445-01 | Installation of differential taper roller bearing outer race < W6AJ > | |
| MD998917 Bearing remover |
General service tool or MD998348-01 | Removal and installation of bearing | |
| MB992197 Oil seal installer |
- | Installation of differential side oil seal | |
| MB992075 Handle |
- | Use with oil seal installer | |
| MB992198 Oil seal installer |
- | Installation of converter housing oil seal | |
| MB992196 Spring compressor |
- | Removal and installation of 2-6 brake piston snap ring | |
| MB990801 Rear axle bearing puller |
- | Remove of tapered roller bearing | |
| MB990811 Side bearing puller cap |
- | Use with rear axle bearing puller | |
| MB990956 Needle bearing installer |
- | Use with rear axle bearing puller | |
| MB990810 Side bearing puller |
- | Remove of tapered roller bearing | |
| MD999566 Claw |
- | Use with side bearing puller | |
| MD998761 Cam oil seal installer |
- | Use with side bearing puller | |
| MB992213 Bearing installer |
- | Installation of tapered roller bearing | |
| MB992150 Oil seal installer |
- | Installation of tapered roller bearing |
TRANSFER SPECIFICATION
| Tool | Tool number and name | Supersession | Application |
|---|---|---|---|
| MD998812 Installer cap |
MIT304180-A or General service tool | Installation of reduction gear bearing inner race (converter housing side and transaxle case side), installation of differential side bearing outer race (converter housing side), installation of differential side bearing inner race (converter housing side), installation of reduction pinion gear installation of transfer oil seal | |
| MB992154 Oil seal installer |
- | Installation of transfer oil seal | |
| MD998777 Camshaft oil seal installer adapter |
- | Installation of transfer dust seal | |
| MD998713 Camshaft oil seal installer |
- | Installation of transfer dust seal | |
| MB992075 Handle |
- | Installation of oil seal | |
| MB992142 Oil seal installer |
- | Installation of transfer oil seal | |
| MB990936 Oil seal installer |
- | Installation of transfer oil seal |