LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2017 >> Lancer SE >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transaxle On-Vehicle Service >> Transaxle Assembly >> Removal And Installation >> Removal Service Points >> <<C>> Torque Converter And Drive Plate Coupling Bolt Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<<C>> Torque Converter And Drive Plate Coupling Bolt Removal

  1. Remove the coupling bolts while turning the crankshaft.
  2. Fully push the torque converter into the transaxle side so that it does not remain on the engine side.
scientia non olet · About LEMON Manuals