Check Of Freeze Frame Data
The freeze frame data can be checked by using the scan tool.
When detecting fault and storing the DTC, the ECU connected to CAN bus line obtains the data before the determination of the DTC and the data when the DTC is determined, and then stores the ECU status of that time. By analyzing each data from scan tool, the troubleshooting can be performed more efficiently. The displayed items are as the table below.
DISPLAY ITEM LIST
| Item No. | Item name | Content | Unit |
|---|---|---|---|
| 1 | Odometer | Total driving distance after the DTC is generated | mile |
| 2 | Ignition cycle | Number of times the ignition switch is turned "ON" or "LOCK (OFF)" after the past failure transition | Number of counts is displayed. |
| 4 | Accumulated minute | Cumulative time for current malfunction of DTC | min |
| 5 | Power supply voltage | Voltage of power supply when the DTC is generated | V |
| 8 | Lateral G sensor | Lateral G of G and yaw rate sensor when the DTC is generated | G |
| 9 | G sensor | Longitudinal G of G and yaw rate sensor when the DTC is generated | G |
| 10 | Master cylinder pressure | Master cylinder pressure of Master cylinder pressure sensor when the DTC is generated | bar |
| 11 | Steering angle | Steering angle of steering wheel sensor when the DTC is generated | deg |
| 12 | Yaw rate sensor | Yaw rate of G and yaw rate sensor when the DTC is generated | deg/s |
| 13 | Stop light switch | Stop light switch condition when the DTC is generated: OFF/ON | - |
| 21 | Pump motor | Pump motor condition when the DTC is generated: OFF/ON | - |
| 28 | A.S.C./TCL off switch | ASC OFF switch condition when the DTC is generated: OFF/ON | - |
| 301 | ABS control | ABS control when the DTC is generated: OFF/ON | - |
| 302 | Brake TCL control | Traction control (brake control) when the DTC is generated: OFF/ON | - |
| 303 | Engine TCL control | Traction control (engine control) when the DTC is generated: OFF/ON | - |
| 304 | A.S.C. Control | ASC control when the DTC is generated: OFF/ON | - |
| 305 | Brake TCL operation | Traction control (brake control) operation when the DTC is generated: Permission/Prohibition | - |
| 401 | FL wheel speed sensor | Wheel speed (FL) when the DTC is generated | mph |
| 402 | FR wheel speed sensor | Wheel speed (FR) when the DTC is generated | mph |
| 403 | RL wheel speed sensor | Wheel speed (RL) when the DTC is generated | mph |
| 404 | RR wheel speed sensor | Wheel speed (RR) when the DTC is generated | mph |