Data List Reference Table

The following items can be read by the scan tool from the ABS-ECU input data.

The following items of ECU input data can be read using scan tool.

1. The system is normal.

   Item No.	Check item	Check conditions	Normal conditions
   01	FL wheel speed sensor	Perform a test run of the vehicle.	The speedometer display and the scan tool display almost agree with each other. <During stop: approximately 0.4 mph (0.7km/h)>
   02	FR wheel speed sensor
   03	RL wheel speed sensor
   04	RR wheel speed sensor
   05	Power supply voltage		Battery positive voltage (10 to 18 V ABS operatable range)
   07	Brake switch (input)	The brake pedal is released.	OFF
   		The brake pedal is depressed.	ON
   14	Brake switch	The brake pedal is depressed.	ON
   		The brake pedal is released.	OFF
   87	Ignition switch (input)	Ignition switch is "ON" position	ON
   88	Vehicle speed	Perform a test run of the vehicle.	The speedometer display and the scan tool display almost agree with each other.
   105	Power supply voltage (input)		Battery positive voltage (10 to 18 V ABS operatable range)

2. System shutdown by ECU

   While ABS-ECU is disabled by the diagnostic function, the scan tool displayed data is different from the actual measurement.