>>E<< Connecting Rod Bearing Installation
- Select an appropriate connecting rod bearing in accordance with the steps below.CAUTION: For the upper bearing, select a plastic-coated bearing.
The connecting rod bearing has a paint mark for identification at the position shown in the figure. Select a suitable bearing from the table.
Upper bearing Lower bearing Identification mark Part number Identification mark Part number 1 1115A532 3 1115A560 2 1115A533 2 1115A559 3 1115A534 1 1115A558 - Set suitable shell bearings on the big end and the cap of the connecting rod.
- Measure the illustrated location. (A - B) should be within 0.5 mm (0.02 inch).