LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2017 >> Mirage ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transaxle (CVT)) >> Diagnosis >> Diagnostic Function >> Warning Indicator
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Warning Indicator

WARNING: This page is about a different variant/trim than selected.

If a malfunction occurs in the CVT system, any of "R", "N", "D", "Ds", "L" or "A" on the transmission range indicator in the multi-information display will be flashed (one flash per two seconds).

NOTE:
  • The transmission range indicator "P" does not flash when a malfunction occurs in the CVT system.
  • When the system is normal, the transmission range indicator "A" is not displayed. Only when a malfunction occurs in the transmission range switch, the indicator will flash.

If the transmission range indicator flashes rapidly (one flash per one second), the transmission fluid temperature is too high. [Flashes when the fluid temperature is approximately 137°C (279°F) or higher, and stops flashing (remains illuminated) automatically when the fluid temperature drops below approximately 132°C (270°F)].

NOTE: These transmission fluid temperatures, at which the indicator flashes or remains illuminated, are indication values on the scan tool (M.U.T.-III).
scientia non olet · About LEMON Manuals