| Timing chain |
| Valve clearance [cold engine] mm (in) |
Intake |
0.22 ± 0.04 (0.009 ± 0.001) |
- |
| Exhaust |
0.30 ± 0.04 (0.012 ± 0.001) |
- |
| Camshaft |
| Cam height mm (in) <M/T> |
Intake |
44.81 (1.764) |
44.31 (1.744) |
| Exhaust |
43.98 (1.731) |
43.48 (1.712) |
| Cam height mm (in) <CVT> |
Intake |
44.86 (1.766) |
44.36 (1.746) |
| Exhaust |
43.98 (1.731) |
43.48 (1.712) |
| Cylinder head and valves |
| Cylinder head bottom face distortion mm (in) |
0.03 (0.001) or less |
- |
| Cylinder head overall height mm (in) |
112.9 - 113.1 (4.445 - 4.452) |
- |
| Valve margin mm (in) |
Intake |
0.85 (0.033) |
- |
| Exhaust |
1.50 (0.059) |
- |
| Valve length mm (in) |
Intake |
87.21 (3.433) |
86.71 (3.414) |
| Exhaust |
88.54 (3.486) |
88.04 (3.466) |
| Valve spring free length mm (in) |
49.6 (1.95) |
48.6 (1.91) |
| Valve spring out-of-squareness |
2° or less |
4° |
| Valve stem-to-guide clearance mm (in) |
Intake |
0.020 - 0.047 (0.0008 - 0.0018) |
0.10 (0.004) |
| Exhaust |
0.030 - 0.057 (0.0012 - 0.0022) |
0.15 (0.006) |
| Valve seat contact width mm (in) |
1.1 - 1.5 (0.044 - 0.059) |
- |
| Valve guide press-fit height mm (in) |
12.7 - 13.3 (0.50 - 0.52) |
- |
| Piston and connecting rod |
| Piston pin press-fit load N (pounds) |
2, 000 - 8, 000 (449.7 - 1798.5) |
- |
| Connecting rod big end thrust clearance mm (in) |
0.10 - 0.35 (0.004 - 0.013) |
0.4 (0.02) |
| Outside diameter difference of connecting rod bolt mm (in) |
0 - 0.1 (0 - 0.003) |
- |
| Piston ring to ring groove clearance mm (in) |
No. 1 |
0.03 - 0.07 (0.0012 - 0.0027) |
0.1 (0.004) |
| No. 2 |
0.02 - 0.06 (0.0008 - 0.0023) |
0.1 (0.004) |
| Piston ring end gap mm (in) |
No. 1 |
0.15 - 0.30 (0.006 - 0.011) |
0.8 (0.03) |
| No. 2 |
0.20 - 0.40 (0.008 - 0.015) |
0.8 (0.03) |
| Oil ring |
0.10 - 0.35 (0.004 - 0.013) |
1.0 (0.04) |
| Crankshaft pin oil clearance mm (in) |
0.026 - 0.062 (0.0011 - 0.0024) |
0.1 (0.004) |
| Crankshaft and cylinder block |
| Crankshaft bearing cap bolt shank length mm (in) |
74.15 - 74.85 (2.920 - 2.946) |
- |
| Crankshaft end play mm (in) |
0.09 - 0.27 (0.004 - 0.010) |
0.30 (0.012) |
| Crankshaft journal oil clearance mm (in) |
0.023 - 0.043 (0.0010 - 0.0016) |
0.1 (0.004) |
| Cylinder block top surface distortion mm (in) |
0.05 (0.002) |
0.1 (0.004) |
| Cylinder bore mm (in) |
75.0 (2.95) |
- |
| Cylindrically mm (in) |
0.01 (0.0004) or less |
- |