<<A>> Column Switch Assembly/Clock Spring Removal

CAUTION: The removed clock spring should be stored in a clean, dry place.

Lift the connector lock of clock spring connector to the direction of the arrow, then unlock and disconnect the connector.

Fig 1: Lifting Connector Lock Of Clock Spring Connector
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Using a pliers or similar tool, pinch and lift the band clump pin shown in illustration.

Fig 2: Band Clump Pin
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
With the flat-tipped screwdriver inserted into the column shaft groove shown in illustration, lift the claw shown as in Section A - A, and then remove the column switch assembly by pulling out the column switch assembly.

Fig 3: Inserting Flat-Tipped Screwdriver Into Column Shaft Groove
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.