LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2017 >> RVR GT >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Generator Assembly >> Inspection >> Rotor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Generator Assembly: Inspection: Rotor

  1. Measure the resistance between the two slip rings of the rotor coil to check the continuity between them.

    Replace the rotor if the resistance is not within the standard value range.

    Standard value: 2.0 - 2.3? 

  2. Check the continuity between the slip rings and core.
    Fig 1: Measuring Resistance Between Slip Rings Of Rotor Coil
    G05375419Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If continuity is present, replace the rotor.
    Fig 2: Checking Continuity Between Slip Rings And Core
    G05375420Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals