| 7001 |
RLS Ignition switch status (IG) |
When the ignition switch is turned to the LOCK or ACC position. |
OFF |
| When the ignition switch is turned to the ON or START position. |
ON |
| 7002 |
RLS Light sensor sensitivity |
When the customize value of the lighting control sensor sensitivity is set to level 1 (quick). |
Level 1 bright |
| When the customize value of the lighting control sensor sensitivity is set to level 2 (slightly quick). |
Level 2 bright |
| When the customize value of the lighting control sensor sensitivity is set to level 3 (normal). |
Level 3 |
| When the customize value of the lighting control sensor sensitivity is set to level 4 (slightly slow). |
Level 4 dark |
| When the customize value of the lighting control sensor sensitivity is set to level 5 (slow). |
Level 5 dark |
| 7004 |
RLS Ignition switch status (ACC) |
When the ignition switch is turned to the LOCK or START position. |
OFF |
| When the ignition switch is turned to the ACC or ON position. |
ON |
| 7007 |
RLS Vehicle speed |
Perform a test run of the vehicle. |
The values displayed on the speedometer and scan tool (M.U.T.-IIISE) are almost the same. |
| 7009 |
RLS Low beam "ON" request |
The area around the light sensor is bright, and the lighting control sensor does not send any low-beam activation request. |
OFF |
| The area around the light sensor is dark, and the lighting control sensor sends low-beam activation request. |
ON |
| 7010 |
RLS Light sensor judgement illuminance output |
When the area around the lighting control sensor is bright. |
The value displayed on the scan tool (M.U.T.-IIISE) becomes large. |
| When the area around the lighting control sensor is dark. |
The value displayed on the scan tool (M.U.T.-IIISE) becomes small. |
| 7011 |
RLS Tail light "ON" request |
The area around the light sensor is bright, and the lighting control sensor does not send any taillight activation request. |
OFF |
| The area around the lighting control sensor is dark, and the lighting control sensor sends taillight activation request. |
ON |
| 7012 |
RLS Light sensor tunnel detect output |
The area around the lighting control sensor is bright, and the lighting control sensor does not detect a tunnel. |
OFF |
| The area around the lighting control sensor is dark, and the lighting control sensor detects a tunnel. |
ON |
| 7020 |
RLS Specification |
- |
EU/NAS |
| 7023 |
RLS ECU diagnostic version |
- |
- |
| 7024 |
RLS ECU hardware version |
- |
- |
| 7025 |
RLS ECU software version |
- |
- |
| 7026 |
RLS ECU part number |
- |
A part number is displayed. |
| 7027 |
RLS ECU serial number |
- |
- |