<<A>> TPMS Transmitter Removal

CAUTION: Be careful not to damage the TPMS transmitter.

Fix the tire on a tire changing machine. Then apply a bead breaking shoe to the shown range to disengage the tire bead from the wheel rim.
NOTE: For the opposite side, repeat the same procedure.

Fig 1: Disengaging Tire Bead From Wheel Rim
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fix the tire on a tire changing machine so that the TPMS transmitter is positioned as shown.
CAUTION: Do not allow any impact or shock to the TPMS transmitter with a tire lever or tire bead.

Fig 2: Tire Fixing Angle On Tire Changing Machine
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Use a tire lever to disengage the upper bead.
Rotate the tire in the direction of arrow to disengage the tire bead from the wheel.

Fig 3: Rotating Tire
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fix the tire on a tire changing machine so that the TPMS transmitter is positioned as shown.

Fig 4: Tire Fixing Angle On Tire Changing Machine
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CAUTION: Do not allow any impact or shock to the TPMS transmitter with a tire lever or tire bead.
Use a tire lever to disengage the lower bead.

Fig 5: Disengaging Lower Bead Using Tire Lever
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Rotate the tire in the direction of arrow to disengage the tire bead from the wheel.
CAUTION: Do not attempt to remove the TPMS transmitter without depressing the portion indicated by the arrow.

Fig 6: Rotating Tire
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Remove the TPMS transmitter from the valve while depressing the portion indicated by the arrow.

Fig 7: Installing TPMS Transmitter Into Valve
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Cut down the entire groove shown by the arrow to remove the valve.

Fig 8: Locating Valve
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.