LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2018 >> Eclipse Cross ES, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Active Stability Control System (ASC) - (With Diagnostics) >> Diagnosis <ASC-Ecu> >> Diagnostic Trouble Code Procedures >> DTC C1707: Implausible Coding Data >> Diagnosis
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC C1707: Implausible Coding Data: Diagnosis

  1. STEP 1. Using scan tool (M.U.T.-IIISE), diagnose the CAN bus line. 
    CAUTION: To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-IIISE).
    1. Connect scan tool (M.U.T.-IIISE). Refer to "How to connect the Scan Tool (M.U.T.-IIISE) ABS WARNING LIGHT, ASC WARNING/OPERATION LIGHT, BRAKE WARNING LIGHT AND BRAKE AUTO HOLD INDICATOR LIGHT CHECK  ."
    2. Turn the ignition switch to the "ON" position.
    3. Diagnose the CAN bus line.
    4. Turn the ignition switch to the "LOCK" (OFF) position.

    Q: Is the check result normal? 

    YES:  Go to Step  3.

    NO:  Repair the CAN bus lines (Refer to CAN BUS DIAGNOSTICS TABLE ). On completion, go to Step  2.

  2. STEP 2. DTC recheck after resetting CAN bus lines. 

    Q: Is DTC C1707 set? 

    YES:  Go to Step  3.

    NO:  This diagnosis is complete.

  3. STEP 3. Using scan tool (M.U.T.-IIISE), check other system DTC. 

    Use scan tool (M.U.T.-IIISE) to check whether any coding-related DTC is set by ETACS-ECU or ECM.

    Q: Is the DTC set? 

    YES:  Troubleshoot for the relevant DTC.

    NO:  Go to Step  4.

  4. STEP 4. Check part number of ASC-ECU. 

    Check the part number of ASC-ECU.

    Q: Is the check result normal? 

    YES:  Go to Step  5.

    NO:  Replace the hydraulic unit (integrated with ASC-ECU) (Refer to HYDRAULIC UNIT  ).

  5. STEP 5. ETACS-ECU coding data check. 

    Q: Is the check result normal? 

    YES:  Go to Step  6.

    NO:  Replace the ETACS-ECU (Refer to ETACS-ECU ).

  6. STEP 6. Check part number of ETACS-ECU. 

    Check the part number of ETACS-ECU.

    Q: Is the check result normal? 

    YES:  Go to Step  7.

    NO:  Replace the ETACS-ECU (Refer to ETACS-ECU ).

  7. STEP 7. ECM coding data check. 

    Q: Is the check result normal? 

    YES:  Go to Step  8.

    NO:  Replace the ECM (Refer to ECM ).

  8. STEP 8. Check whether the DTC is set again. 

    Erase the DTC.

    Q: Is DTC C1707 set? 

    YES:  Replace the hydraulic unit (integrated with ASC-ECU) (Refer to HYDRAULIC UNIT  ).

    NO:  The trouble can be an intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTIONS ).