|
|
ABS SERVICE REQUIRED |
Displayed when a malfunction occurs to the anti-lock braking system (ABS). |
If the warning screen is not displayed normally or if the screen continues to be displayed, perform the troubleshooting for the ASC. (Refer to
SYMPTOM CHART
<ASC-ECU>.) |
|
|
ASC SYSTEM SERVICE REQUIRED |
Displayed when there is a malfunction to the ASC. |
If the warning screen is not displayed normally or if the screen continues to be displayed, perform the troubleshooting for the ASC. (Refer to
SYMPTOM CHART
<ASC-ECU>.) |
|
|
PUSH SWITCH WHILE APPLYING BRAKE |
Displayed when the switch is operated without depressing the brake pedal while the brake auto hold function is deactivated. |
If the warning screen is not displayed normally or if the screen continues to be displayed, check the ASC DTC. (Refer to
DIAGNOSTIC TROUBLE CODE CHART
<ASC-ECU>.) |
| APPLY BRAKE |
Displayed when the brake is released (the auto hold function is deactivated). (In normal way, when the ASC fluid pressure is reached, the electric parking brake controls the brake. However, this icon is displayed when the parking brake cannot be applied due to a electric parking brake failure.) |
| It may be displayed when ACC is used.For details, refer to the item of ACC. |
|
|
BRAKE AUTO HOLD CANCELED |
Displayed when the auto hold function is cancelled under any of the conditions below with the brake auto hold function operationally ready.
- The driver operates the brake auto hold switch.
- The electric parking brake fails
- The ASC fails
|
If the warning screen is not displayed normally or if the screen continues to be displayed, perform the troubleshooting for the ASC. (Refer to
SYMPTOM CHART
<ASC-ECU>.) |
| BRAKE AUTO HOLD NOT AVAILABLE |
Displayed when the system cannot be resumed to a stand by mode although the driver operates the brake auto hold switch under any of the conditions below:
- The electric parking brake fails
- The brake auto hold function fails
|