Initialization Procedure

Required Special Tools:

MB992744: Vehicle Communication Interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite Main Harness A
MB992747: V.C.I.-Lite USB Cable Short
MB992748: V.C.I.-Lite USB Cable Long

CAUTION: To prevent damage to the scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting the scan tool (M.U.T.-IIISE).

Fig 1: Brake Pedal And Connector Terminals

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

After the ignition switch is in "LOCK" (OFF) position, connect scan tool (M.U.T.-IIISE) to the data link connector.
Turn the ignition switch to the "ON" position.
Select "MFI" from System select Screen of the scan tool (M.U.T.-IIISE).
Select "Special Function" form MFI Screen.
Select "Timing chain maintenance" from Special Function Screen.
Select "Learned value reset" form Timing chain maintenance Screen.
Press "ON" to reset the learning value.

Fig 2: Connecting Scan Tool (M.U.T.-IIISE) To Data Link Connector

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.