LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2019 >> Eclipse Cross ES, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Controller Area Network (Can) - (With Diagnostics) >> Diagnosis <Gateway> >> Diagnostic Trouble Code Procedures >> DTC U1190: No Receive Fault Detect Signal >> Judgment Criteria
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Judgment Criteria

ETACS-ECU sends the DTC (U code) detection permission or prohibition signal to each ECU connected to the CAN bus line. If the gateway-ECU cannot receive the DTC (U code) detection permission or prohibition signal for 5 seconds after turning the ignition switch to "ON" position, DTC U1190 will be set.