Keyless Entry System Inspection

Check the system as described below. If the system does not work, carry out troubleshooting. Refer to DIAGNOSTIC FUNCTION .

• Operate the transmitter to check that the doors can be locked and unlocked.
• Operate the transmitter to check when the door locking or unlocking operation is performed that the hazard warning light lock: flash once, unlock: flash twice (default setting) and dome light lock: flash once, unlock: illuminates for 15 seconds (default setting) answer back operates. Refer to CUSTOMIZATION FUNCTION .
  NOTE:

  • The customization function allows you to change the answerback setting as follows. Prior to that check, confirm which setting is activated.
  • The hazard warning lights flash once when locked and twice when unlocked (default setting).
  • The hazard warning lights flash once when locked and do not flash when unlocked.
  • The hazard warning lights do not flash when locked and flash twice when unlocked.
  • The hazard warning lights do not flash when both locked and unlocked.
  • The hazard warning lights flash twice when locked and once when unlocked.
  • The hazard warning lights flash twice when locked and do not flash when unlocked.
  • The hazard warning lights do not flash when locked and flash once when unlocked.