How To Connect The Scan Tool (M.U.T.-IIISE)

Required Special Tools:

MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite main harness A
MB992747: V.C.I.-Lite USB cable short
MB992748: V.C.I.-Lite USB cable long

CAUTION: To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-IIISE).

Ensure that the ignition switch is at the "LOCK" (OFF) position.
Start up the personal computer.
Connect special tool MB992747/M992748 to special tool MB992744 and the personal computer.
Connect special tool MB992745 to special tool MB992744.

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Connect special tool MB992745 to the data link connector.
NOTE: When the special tool MB992745 is connected to the data link connector, the special tool MB992744 indicator light will be illuminated in a green color.
Start the scan tool (M.U.T.-IIISE) system on the personal computer.

NOTE: Disconnecting scan tool (M.U.T.-IIISE) is the reverse of the connecting sequence, making sure that the ignition switch is at the "LOCK" (OFF) position.

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.