How To Set By Operating Scan Tool (M.U.T.-IIISE)

CAUTION:

If the combination meter needs to be replaced, the current driving distance and elapsed days must be entered into the meter after the replacement in order to be used for service reminder function. Therefore, read "Integrated mileage for reminder," "Integrated days for reminder," "Mileage until Extra reminder," "Months until Extra reminder," and "Current schedule" from the meter before the replacement using the special function of scan tool (M.U.T.-IIISE), and note them. If "Integrated mileage for reminder" or "Integrated days for reminder" cannot be read from the meter using scan tool (M.U.T.-IIISE), use the following method.
1. As for the driving distance for check warning, use the driving distance displayed on the odometer.
2. As for the elapsed days for check warning, calculate the number of elapsed days from the delivery date to the customer (service reminder function start date) and current date.
After the service reminder function has started, when the elapsed days for check warning is reset for the vehicle whose battery is removed for a long period (15 days or more), calculate the elapsed days from the delivery date to the customer (service reminder function start date) and the current date, and then input it.

Using scan tool (M.U.T.-IIISE), the following service reminder functions can be set. Before setting, check the current status (schedule, elapsed distance and elapsed days).

Extra reminder setting
Extra reminder cancel
Periodic reminder schedule set
Integrated value adjustment
Optional INT schedule setting