LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2019 >> Eclipse Cross LE >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) (With Diagnostics) >> Transaxle Assembly >> Removal And Installation >> Installation Service Points >> >>B<< Transaxle Control Cable Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>B<< Transaxle Control Cable Installation

  1. Move the selector lever to the "N" range.
  2. Move the manual control lever to Neutral position.
    G05375836Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Align the hole at the end of the manual control lever and the hole in the transmission range switch body flange (section A - A).
    NOTE: Insert a 5 bar into the aligned holes in the transmission range switch body flange and on the tip of the manual control lever to position the transmission range switch body.
    G12147254Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Attach the transaxle control cable to the manual control lever.
  5. Make sure that the transaxle side ranges that are corresponding to the selector lever position operate and function without fail.
    G12147255Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals