DTC B1A08: Keyless/F.A.S.T. Key 1 Fail; DTC B1A09 Keyless/F.A.S.T. Key 2 Fail; DTC B1A0A Keyless/F.A.S.T. Key 3 Fail; DTC B1A0B Keyless/F.A.S.T. Key 4 Fail; DTC B1A0C Keyless Key 5 Fail; DTC B1A0D Keyless Key 6 Fail; DTC B1A0E Keyless Key 7 Fail; DTC B1A0F Keyless Key 8 Fail: Diagnosis

STEP 1. Synchronize the rolling code and recheck the DTC.
1. Synchronize the rolling code.
  - Push the lock switch or unlock switch of transmitter twice or more.
  - If the keyless entry system does not resume by the procedure above, register the key again (Refer to KEYLESS ENTRY SYSTEM TIMER LOCK FUNCTION INSPECTION ).
2. Recheck if the DTC is set.
  1. Push the lock switch or unlock switch of transmitter.
  2. Check if the DTC is set.
Q: Is the DTC set?

YES : Go to Step 2.

NO : The diagnosis is complete.
STEP 2. Check whether the DTC is set again.
Replace the transmitter by which the DTC is set with a new one, register the key (Refer to KEYLESS ENTRY SYSTEM TIMER LOCK FUNCTION INSPECTION .), and recheck if the DTC is set.
1. Push the lock switch or unlock switch of transmitter.
2. Erase the DTC.
3. Check if the DTC is set.
Q: Is the DTC set?

YES : Replace ETACS-ECU and register the ID codes (Refer to KEYLESS ENTRY SYSTEM TIMER LOCK FUNCTION INSPECTION ).

NO : The diagnosis is complete.