Diagnostic Trouble Code Chart
CAUTION:
During diagnosis, a diagnostic trouble code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
CAUTION:
- When the diagnostic trouble code (DTC) of the transaxle control module (TCM) is erased, the DTC of the engine control module (ECM) is also erased at the same time.
- If DTC (U0001) of the Malfunction of CAN communication circuit (Bus off) or DTC (U0100) of the CAN time-out error (Engine) is set as a current trouble to the TCM, CAN bus diagnosis or troubleshooting each DTC should be carried out since the DTC of TCM will not be erased.
| DTC | Diagnostic item | Reference |
|---|---|---|
| P0703 | Malfunction of stoplight switch | |
| P0705 | Malfunction of transmission range switch | |
| P0711 | Malfunction of transmission fluid temperature sensor (Abnormality in transmission fluid temperature sensor function) | |
| P0712 | Malfunction of transmission fluid temperature sensor (low input) | |
| P0713 | Malfunction of transmission fluid temperature sensor (high input) | |
| P0715 | Malfunction of primary pulley speed sensor | |
| P0720 | Malfunction of secondary pulley speed sensor | |
| P0730 | Incorrect gear ratio | |
| P0741 | Abnormality in lock-up function | |
| P0776 | Abnormality in secondary pressure solenoid valve function | |
| P0815 | Malfunction of paddle shift up switch <Vehicles with paddle shift> | |
| P0816 | Malfunction of paddle shift down switch <Vehicles with paddle shift> | |
| P0826 | Malfunction of shift switch assembly | |
| P0842 | Malfunction of secondary pressure sensor (low input) | |
| P0843 | Malfunction of secondary pressure sensor (high input) | |
| P0847 | Malfunction of primary pressure sensor (low input) | |
| P0848 | Malfunction of primary pressure sensor (high input) | |
| P084A | Abnormality in fluid pressure sensor function | |
| P0962 | Malfunction of line pressure solenoid valve (low input) | |
| P0963 | Malfunction of line pressure solenoid valve (high input) | |
| P0966 | Malfunction of secondary pressure solenoid valve (low input) | |
| P0967 | Malfunction of secondary pressure solenoid valve (high input) | |
| P0969 | Abnormality in primary pressure solenoid valve function | |
| P0970 | Malfunction of primary pressure solenoid valve (low input) | |
| P0971 | Malfunction of primary pressure solenoid valve (high input) | |
| P1607 | Malfunction of system power supply (low voltage) | |
| P1637 | Malfunction of memory backup | |
| P1773 | Malfunction of ABS/ASC | |
| P1798 | Malfunction of G sensor signal | |
| P2719 | Abnormality in select pressure solenoid valve function | |
| P2720 | Malfunction of select pressure solenoid valve (low input) | |
| P2721 | Malfunction of select pressure solenoid valve (high input) | |
| P2763 | Malfunction of lock-up solenoid valve (high input) | |
| P2764 | Malfunction of lock-up solenoid valve (low input) | |
| P2765 | Malfunction of turbine speed sensor | |
| U0001 | Malfunction of CAN communication circuit (Bus off) | |
| U0100 | CAN time-out error (Engine) | |
| U0121 | CAN time-out error (ABS/ASC) | |
| U0141 | CAN time-out error (ETACS) | |
| U0317 | CAN time-out error (EPB) | |
| U1195 | Coding not completed | |
| U1197 | Coding data unavailable | |
| U1417 | Wrong coding data received |