Customization Function
Using the ETACS system of scan tool (M.U.T.-III), the following functions can be programmed. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool display) | Adjustment item | Adjusting content (scan tool display) | Adjusting content |
|---|---|---|---|
| Hazard answer back | Adjustment of the number of keyless hazard warning light answer back flashes | Lock: 1, Unlock: 2 | LOCK: Flashes once, UNLOCK: Flashes twice (Initial condition) |
| Lock: 1, Unlock: 0 | LOCK: Flashes once, UNLOCK: No flash | ||
| Lock: 0, Unlock: 2 | LOCK: No flash, UNLOCK: Flash twice | ||
| Lock: 2, Unlock: 1 | LOCK: Flash twice, UNLOCK: Flash once | ||
| Lock: 2, Unlock: 0 | LOCK: Flash twice, UNLOCK: No flash | ||
| Lock: 0, Unlock: 1 | LOCK: No flash, UNLOCK: Flash once | ||
| Lock: 0, Unlock: 0 | No function | ||
| Door unlock mode | Adjustment of power door locks with selective unlocking | All Doors Unlock | The first operation of keyless entry system or unlock operation by KOS unlocks all doors. |
| Dr Door Unlock | The first operation of keyless entry system or unlock operation by KOS unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors. (initial condition) | ||
| Door unlock (Shift "P" position) | Adjustment of the auto door unlock (P position) function <CVT> | Disable | No function (Initial condition) |
| Enable | Always with function | ||
| With P/W Lock SW | dammy | ||
| Timer lock timer | Timer lock period adjustment | 30 sec | 30 seconds (Initial condition) |
| 60 sec | 60 seconds | ||
| 120 sec | 120 seconds | ||
| 180 sec | 180 seconds | ||
| Horn chirp by keyless | Horn chirp by keyless entry system | Not sound horn | No horn answerback function |
| Lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed once. | ||
| W lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed twice. (initial condition) |