DTC C1707: Implausible coding data: Notes
CAUTION:
- If there is any problem in the CAN bus lines, an incorrect DTC may be set. Prior to this diagnosis, diagnose the CAN bus lines. Refer to CAN BUS DIAGNOSTICS TABLE .
- Whenever ECU is replaced, ensure that the CAN bus lines are normal.
- When DTC C1707 is set in ASC-ECU, the DTC may also be set in ETACS-ECU. When the DTC is set in ETACS-ECU, carry out the diagnosis of the DTC for ETACS-ECU first.
- When the hydraulic unit (integrated with ASC-ECU) is replaced, always carry out the calibration of the G and yaw rate sensor and the steering wheel sensor. Refer to HYDRAULIC UNIT INSTALLATION ADJUSTMENT and STEERING WHEEL SENSOR CALIBRATION .