LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2019 >> Mirage RF >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) >> Wheel Speed Sensor >> Removal And Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Notes

CAUTION:
  • The vehicle speed detection encoder collects any metallic particle easily, because it is magnetized. Make sure that the encoder should not collect any metallic particle. Check that there is not any trouble prior to assembling it.
  • The wiring harness for the wheel speed sensor should be routed without twisting.
Pre-removal and post-installation operation 
  • Rear Scuff Plate Removal Refer to INTERIOR TRIM <Rear wheel speed sensor>
Fig 1: Removing/Installing Wheel Speed Sensor Components With Torque Specification
G12681377Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
NOTE: The encoder for detecting front wheel speed is a non-disassemble part integrated with the wheel bearing.
scientia non olet · About LEMON Manuals