LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2019 >> Mirage SE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> On-Vehicle Service >> CVT Control Component Check >> Shift Lock Mechanism Check >> Shift Lock Solenoid
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Shift Lock Solenoid

  1. Measure the resistance between terminal number 3 and number 7 of the selector lever assembly connector.

    Standard value: 40 ± 2 ohm 

  2. When the resistance is outside the standard value, replace the selector lever assembly. Refer to TRANSAXLE CONTROL .
    G11278291Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals