LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2019 >> Outlander ES, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator Assembly >> DISASSEMBLY AND REASSEMBLY <3.0 L Engine> >> Disassembly Service Points >> <<C>> Stator/Regulator Assembly Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

<<C>> Stator/Regulator Assembly Removal

CAUTION:
  • Use a 180 - 250 W soldering iron, and finish unsoldering within four seconds. Diodes will be damaged by heat if unsoldering time is too long.
  • Avoid applying undue force to the diode leads.
  1. Unsolder the stator leads from the main diode of the rectifier assembly when the stator is removed.
  2. When removing the rectifier assembly from the regulator assembly, undo the soldered points on the rectifier assembly.
    G05431113
scientia non olet · About LEMON Manuals