Instrument Panel Cluster Lens
WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the Instrument Panel Cluster (IPC) from the instrument panel. Refer to MODULE, INSTRUMENT PANEL CLUSTER (IPC), REMOVAL .
- Working around the perimeter of the IPC housing, disengage each of the latches that secure the cluster lens (2), to the IPC housing (1).
- Carefully separate and remove the lens from the face of the IPC.