Diagnostic Test
WARNING: This page is about a different car, the 2020 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
NO REPAIR REQUIRED
- This DTC is set when the vehicle has been operated on adverse terrain (sand, mud, snow, etc.,) or the vehicle was operated improperly.
- With the scan tool, read and record the DTCs.
- Allow the All Wheel Drive (AWD) Drive system to cool for 2 hours.
- With the scan tool, erase the DTCs.
- Perform the DTCM VERIFICATION TEST. Refer to DTCM VERIFICATION TEST .
Did any DTCs return?
Yes
- Perform the appropriate DTC procedure(s).
No
- Test complete.