Section 60 (Keyless Entry System - Vehicles Without Keyless Operation System (With Diagnostics))
WARNING: This page is about a different car, the 2018 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Special Tool
- Keyless Entry System Diagnosis
- Standard Flow Of Diagnostic Troubleshooting
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- DTC B1A08: Keyless/F.A.S.T. key 1 fail DTC B1A09 Keyless/F.A.S.T. key 2 fail DTC B1A0A Keyless/F.A.S.T. key 3 fail DTC B1A0B Keyless/F.A.S.T. key 4 fail DTC B1A0C Keyless key 5 fail DTC B1A0D Keyless key 6 fail DTC B1A0E Keyless key 7 fail DTC B1A0F Keyless key 8 fail
- DTC B1A10: Keyless/F.A.S.T. key 1 low BATT. DTC B1A11 Keyless/F.A.S.T. key 2 low BATT. DTC B1A12 Keyless/F.A.S.T. key 3 low BATT. DTC B1A13 Keyless/F.A.S.T. key 4 low BATT. DTC B1A14 Keyless key 5 low battery DTC B1A15 Keyless key 6 low battery DTC B1A16 Keyless key 7 low battery DTC B1A17 Keyless key 8 low battery
- Trouble Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: Keyless entry system does not work
- Inspection Procedure 2: Keyless entry hazard light answerback function or the dome light answerback function does not work normally
- Inspection Procedure 3: The timer lock function does not work after the doors have been unlocked by the keyless entry system
- Inspection Procedure 4: Multimode keyless entry system function does not work at all
- Inspection Procedure 5: Power door locks with selective unlocking does not work
- On-Vehicle Service
- Transmitter