LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2019 >> Outlander ES, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) >> Diagnosis <S-AWC> >> Data List Reference Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List Reference Table

Item No. Display on M.U.T.-III Check conditions Normal condition
1 AWC control mode AWC ECO is selected (displayed on multi information display). AWC ECO
NORMAL is selected (displayed on multi information display). NORMAL
SNOW is selected (displayed on multi information display). SNOW
LOCK is selected (displayed on multi information display). LOCK
2 Longitudinal drive force (Meter) Perform a test run of the vehicle. 0 to 5 segment
3 Lateral drive force (Meter) Perform a test run of the vehicle. Driving straight ahead 0segment
Cornering to the right 1 to 5 segment (right turn)
Cornering to the left 1 to 5 segment (left turn)
4 Front coupling current Perform a test run of the vehicle. Changes within 0 to 3 A (command value and actual value agree with each other)
5 Center coupling current Perform a test run of the vehicle. Changes within 0 to 3 A (command value and actual value agree with each other)
6 AWC protection control Correct OFF
Malfunction ON
7 AWC system fail Correct OFF
Malfunction ON
8 Steering angle sensor Steering wheel steered Within a predetermined steering angle
9 Steering angle speed Steering wheel: Without steering wheel operation 0 deg/s
Steering wheel: With steering wheel operation Changes depending on the turning speed.
10 Steering angle sensor (status) Normal Normal
Faulty Fail
Neutral point not learned Not learning
Neutral point not learned or failed Not learn/Fail
11 Accelerator position Release the accelerator pedal Approximately 0%
Depress the accelerator pedal 0 to 100%
Accelerator pedal fully opened Approximately 100%
12 Engine speed Idling and test run 0 to Maximum engine speed
13 A/T gear position Gear range: P P
Gear range: R R
Gear range: N N
Gear range: 1st 1st
Gear range: 2nd 2nd
Gear range: 3rd 3rd
Gear range: 4th 4th
Gear range: 5th 5th
Gear range: 6th 6th
14 FL wheel speed (raw value) - (reference because of r/min) -
15 FR wheel speed (raw value)  
16 RL wheel speed (raw value)  
17 RR wheel speed (raw value)  
18 FL wheel speed sensor Perform a test run of the vehicle. Nearly the same as the speedometer display
19 FR wheel speed sensor  
20 RL wheel speed sensor  
21 RR wheel speed sensor  
22 Yaw rate sensor When the vehicle is stationary Approximately 0 deg/s
Perform a test run of the vehicle. -90 to 90 deg/s
23 Lateral G sensor Vehicle is stopped (horizontal state). Approximately 0 m/s2
Perform a test run of the vehicle. -10.24 to 10.08 m/s2
24 Longitudinal G sensor Vehicle is stopped (horizontal state). Approximately 0 m/s2
Perform a test run of the vehicle. -10.24 to 10.08 m/s2
25 A.S.C. status Ignition switch: ON Either of "A.S.C. ON", "A.S.C. OFF", "A.S.C. S-AWC OFF" or "A.S.C. fail" is displayed.
28 Brake switch (CAN input) Brake pedal: Depressed ON
Brake pedal: Released OFF
29 Parking brake SW (CAN input) Parking brake lever: Pulled ON
Parking brake lever: Released OFF
30 Ignition SW (CAN input) Ignition switch: ACC ACC
Ignition switch: ON ON
Ignition switch: START START
31 Battery voltage (CAN input) Ignition switch: ON 6 to 17 V
32 IOD fuse (CAN input) Fuse inserted ON
Fuse removed OFF
33 Odometer (CAN input) Ignition switch: ON 0 to 1, 677, 721.4 km (0.00 to 1, 042, 710.62 mile)
34 Ambient temperature (CAN input) Ignition switch: ON -30°C to 85°C (-22°F to 185°F)
35 Ignition off time (CAN) After ignition switch: OFF for one minute or more, ignition switch: ON 0 to 254 min
38 IG1 Ignition switch: ON ON
Ignition switch: OFF OFF
39 ECU power supply voltage Ignition switch: ON 10 to 18.75 V
40 Output load voltage Ignition switch: ON 10 to 18.75 V
41 Mode SW Drive mode selector switch: Pushed ON
Drive mode selector switch: Released OFF
44 SAS (adjusted value) Ignition switch: ON -15 to 15 deg
45 VIN writing counter Ignition switch: ON Writing count
46 VIN (original) lock Ignition switch: ON Locked LOCK
Unlocked UNLOCK
47 Mileage counter Ignition switch: ON Counter value (km (mile))
48 Coding counter Ignition switch: ON 0 to 255 times